Product ID:JET BLOW
MSDS Date:08/01/1990
FSC:3439
NIIN:00N061669
MSDS Number: BXZFP

CONTINENTAL WELDING CORP

2021 HULMAN ST
TERRE HAUTE, IN 47803
US

Emergency Phone: 812-232-2488

Info Phone: 812-232-2488

Cage: 3Y167

CONTINENTAL WELDING CORP

TERRE HAUTE, IN 47803 US

Telephone: 812-232-2488

Cage: 3Y167

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 63-73%

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

CELLULOSE; (PAPER FIBER)

CAS: 9004-34-6

RTECS: FJ5691460

Fraction By Weight: 1-11%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3

SILICA, CRYSTALLINE - QUARTZ; (SILICON DIOXIDE)

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 1-11%

OSHA PEL 0.1 MG/M3 (MFR)

ACGIH TLV: 0.1 MG/M3 RDUST

SODIUM SILICATE

CAS: 1344-09-8

Fraction By Weight: 1-11%

OSHA PEL N/K

ACGIH TLV: 5 MG/M3 (MFR)

POTASSIUM SILICATE

CAS: 1312-76-1

Fraction By Weight: 1-11%

OSHA PEL N/K

ACGIH TLV: 5 MG/M3 (MFR)

GRAPHITE

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: 1-11%

OSHA PEL 15 MPPCF

ACGIH TLV: 2 MG/M3 RDUST

1); (MAGNESIUM CARBONATE)

CAS: 546-93-0

RTECS: OM2470000

Fraction By Weight: 1-11%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

PLUME, AS WELL AS PRESENCE OF CONTAMINANTS IN ATM

RTECS: 9999999ZZ

& DEGREASING ACTIVITIES). WHEN ELECTRODE IS

RTECS: 9999999ZZ

FROM INGS. FUME & GAS DECOMP PROD, NOT INGS IN

RTECS: 9999999ZZ

ORIGINATING FROM VOLATILIZATION, RXN/OXIDN OF MATLS

RTECS: 9999999ZZ

COATING, ETC. AS NOTED ABOVE. THESE COMPONENTS ARE

RTECS: 9999999ZZ

METALS (CHARACTERIZATION OF ARC WELDING FUME

RTECS: 9999999ZZ

CONSTITUENTS WOULD INCL COMPLEX OXIDES OF IRON &

RTECS: 9999999ZZ

CARBON DIOXIDE. OZONE & NITROGEN OXIDES MAY BE

RTECS: 9999999ZZ

CONSTITUENTS WOULD INCL COMPLEX OXIDES OF IRON,

RTECS: 9999999ZZ

LIM FOR CR VI (0.05MG/M3) MAY BE REACHED BEFORE LIM

RTECS: 9999999ZZ

CR VI LEVEL. GASEOUS RXN PROD MAY INCL CARBON

RTECS: 9999999ZZ

FORMED BY RADIA FROM ARC IN TIG WELDING. ONE REC

RTECS: 9999999ZZ

WORKERS ARE EXPOSED IS TO TAKE AIR SAMPLE INSIDE

RTECS: 9999999ZZ

ANTICIPATED TO BE

RTECS: 9999999ZZ

1910), US GOVERNMENT PRINTING OFFICE,

RTECS: 9999999ZZ

LENS. AS RULE OF THUMB, START W/SHADE DARKER TO

RTECS: 9999999ZZ

GIVES SUFFICIENT VIEW OF THE WELD ZONE. PROVIDE

RTECS: 9999999ZZ

GLOVES, PROT FSHLD & MAY INCL ARM PROT,

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: FUMES AND GASES CAN BE
DANGEROUS TO YOUR HEALTH. SHORT-TERM OVEREXPOSURE TO WELDING FUMES
MAY RESULT IN DISCOMFORT SUCH AS: DIZZINESS, NAUSEA, OR DRYNESS OR
IRRITATION OF NOSE, THROAT, OR EYES. CHRONIC: LONG-TERM
OVEREXPOSURE MAY LEAD TO SIDEROSIS (IRON DEPOSITS IN THE LUNGS) AND
IS BELIEVED BY (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ: IARC
MONOGRAPHS, SUPPLEMENT, VOL 7, PG 341, 1987: GROUP 2A. NTP 7TH
ANNUAL REPORT (ING 21)
Effects of Overexposure:HLTH HAZ: SOME INVESTIGATORS TO AFFECT
PULMONARY FUNCTION. ARC RAYS CAN INJURE EYES AND BURN SKIN.
ELECTRIC SHOCK CAN KILL.
Medical Cond Aggravated by Exposure:PREEXISTING RESPIRATORY OR ALLERGIC
CONDITIONS MAY BE AGGRAVATED IN SOME INDIVIDUALS.

First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
BY AMERICAN RED CROSS. EYES: FLUSH WITH POTABLE WATER FOR AT LEAST
15 MINUTES. SEE MD . SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER. S
EE MD . INHALATION: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN OR ARTIFICIAL RESPIRATION) . INGESTION: CALL MD IMMEDIATELY
.

Flash Point:NON-FLAMMABLE.
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC AND SPARKS CAN IGNITE
COMBUSTIBLES. REFER TO AMERICAN NATIONAL STANDARD Z49.1 FOR FIRE
PREVENTION DURING WELDING.

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:TRAIN THE WELDOR TO KEEP HIS HEAD OUT
OF THE FUMES. TRAIN THE WELDER NOT TO TOUCH LIVE ELECTRICAL PARTS
AND TO INSULATE HIMSELF FROM WORK AND GROUND.
Other Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS & PREC LABEL ON
THIS PROD. SEE AMERICAN NATIONAL STD Z49.1, SFTY IN WELDING &
CUTTING, PUBLISHED BY AMERICAN WELDING SOCIETY, P.O. BOX 351040,
MIAMI, FL 33135 & OS HA PUBLICATION 2206 (29 CFR (ING 22)

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR-SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED
SPACE OR WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE
BELOW TLV.
Ventilation:USE ENOUGH VENT, LOC EXHAUST AT ARC/BOTH TO KEEP FUMES &
GASES Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:WEAR HELMET/USE FSHLD W/FILTER (ING 23)
Other Protective Equipment:WEAR HEAD/HAND/BODY PROT TO PREVENT INJURY
FROM RADIA, SPARKS & ELEC SHOCK. SEE ANSI Z49.1. AT MIN THIS INCL
(ING 25)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD: PROC & ELECTRODES USED. OTHER CNDTNS WHICH ALSO
INFLUENCE COMP & QTY OF FUMES & GASES TO WHICH WORKERS MAY BE
EXPOSED INCL: COATINGS ON METAL BEING WELDED (SUCH AS PAINT,
PLATING/GALV ANIZATION), # OF WELDS & VOL OF WORK AREA, QUALITY &
AMT OF VENT, POSITION OF WELDOR'S HEAD W/RESPECT TO FUME (ING 8)

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES CANNOT BE CLASSIFIED
SIMPLY. COMP & QTY OF BOTH ARE DEPENDENT UPON METAL BEING WELDED,
PROCESS, (SUP DAT)

Waste Disposal Methods:DISPOSE OF ANY GRINDING DUST OR WASTE RESIDUES
IN ACCORDANCE WITH EPA OR LOCAL REGULATIONS. DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.